This System uses the Eliminator Next Gen Practice Tree Unit. This is NOT the Eliminator Competition Track Timer.
Popular Uses:
Mud ET Single or Dual Lane,
Hill Climbs,
Low Budget Dirt Tracks,
Snowmobile Test Track,
Asphalt Test Track,
Dyno Runs,
Hill Climbs
General Features
- Accurate to 0.001 seconds
- Compatible with Portatree Time Slip Printers
- Compatible with Portatree 2″ and 4″ LED Displays
- Tree Features:
- Pro, Full, or Blocker Tree Type
- Configurable Tree Speed (0.100 to 0.900 seconds)
- Dual Red (red light shown in both lanes if both are red)
- MPH and KPH units available for speed
- Auto or Manual Start
- Configurable Auto Start Time (1 to 20 seconds)
- Stage on time, stage to start, and random start delay are configurable
- Auto or Manual Car Number
- Auto number uses sequential numbers as the car number each run
- Manual number allows the race operator to enter car numbers each run
- Perfect tree (0.000 perfect light) or tree speed as perfect light
- Enable/disable win lights on the tree
- Auto or manual reset after a race is complete
- Automatically saves last 10 runs made
- Saved runs can be stored to memory and downloaded to a computer using Test Track Connect software
- Track Leaderboard software available:
- Compatible with Window™ XP and higher
- Rank racers/runs by best Reaction Time, fastest MPH, quickest ET, or most wins
- Register racers to a car number
- Run races from a computer
- Generate Pro or Sportsman 4, 8, 16, and 32 car ladders
Single Lane Test Track Features
- Sensors available for Single Lane Test Tracks
- Pre-Stage, Stage, Guard, Vehicle Reaction Time (VRT), 60ft, Mid ET, MPH/KPH, and Finish
- Rules for Guard beam tracks
- VRT not available on Guard beam tracks
- If Guard is enabled, Stage sensor is not mandatory
- If Guard is disabled, Stage sensor is mandatory
- Pre-Stage only available when Stage sensor is enabled
- Disable Finish for Starting Line Only Track
- Pre-Stage, Stage, VRT or Guard
- Finish Line must be present to enable the following sensors
- 60ft, Mid ET, MPH/KPH
Dual Lane Test Track Features
- Sensors available for Dual Lane Test Tracks
- Pre-Stage, Stage, MPH/KPH, Finish
- Heads up only system
- First to the finish line is the winner
- For starting line only tracks, best reaction time is the winner
- Rules for Guard beam tracks
- MPH/KPH not available on Guard beam tracks
- If Guard is enabled, Stage sensor is not mandatory
- If Guard is disabled, Stage sensor is mandatory
- Pre-Stage only available when Stage sensor is enabled
- Disable Finish for Starting Line Only Track
- Pre-Stage, Stage, Guard
- Finish Line must be enabled to enable MPH/KPH sensors
- Extra Tree Features Available
- Top Bulb Lock (in Full Tree mode)
- Real Red
- When on, worst red light is the loser
- When off, first red light is the loser
- Handicap start available